10W Dimmable Recessed LED Downlights IP44 & ICF Rated Warm White Expand

10W Dimmable LED Downlights IP44 & IC-F Rated Warm White High Quality

New

High quality 10W dimmable recessed LED downlights with in-built driver, 3000k Warm White, 806lm, 92-96mm cutout, IP44 bathroom OK, IC-F rated (insulation contactable). The LED downlights comply with AS/NZS safe standards 60598.2.2 (SAA & RCM Certificate) and with 3 year warranty. 0.6m flex and plug is also included.

More details

8355 Items

$ 13.00

tax excl.

10W Recessed LED Downlight Specifications:

Model No.3014385251312DriverIntegral driver
Voltage220-240V, 50/60HzMaterialPlastic and Aluminium
Power10WEco-friendlyNo Hg or Pb
Light Output806Lumens (Bean Angle: 90°)Eye-protectionLess-flickering driver
Wattage Equivalent80WAverage life
25,000 hours
Colour Temp.3000K warm whiteIP44 ratedBathroom safe, soffits safe, entrance safe
DimmableYes, trailing or leading* edgeIC-F ratedInsulation contable
EfficiencyRA > 82, PF > 0.9, CRI > 83StandardsAS/NZS standards 60598.2.2
SizeØ119x65mmCertificateSAA & RCM
Cutout SizeØ92-96 mmWarranty3 years, installed by licensed electrician
Weight240gFitting600mm flex and plug

*some leading edge dimmers may cause noises.

How to choose right LED downlights for your home or project?

Here are the 9 important aspects which can help you choose right LED downlights in New Zealand.
  1. Certificate - meeting AS/NZS standards 60598.2.2?
  2. Dimmable or not?
  3. IP rating of the light - for example, it has to be at least IP44 rated for wet area use
  4. Insulation contact rating of the light - Insulation contactable and/or fire resistant
  5. Brightness requirement - lumens
  6. Light colour - warm white is recommended by the government for residential using.
  7. Beam angle - a spotlight or a light with wide beam angle
  8. Cut-out size - the size of your existing holes if any
  9. Light quality - how to roughly evaluate the light quality
Please check here for more details about how to choose right LED downlights.

How to easily cut downlight holes?

We have developed a 92mm diametre holesaw specially for our LED downlights. The holesaw can be used for either 10W or 13W LED downlights. We offer a free holesaw for any order over $250+gst. Please use the voucher code "FreeHoleSaw250".

How to install one LED downlight in one minute?

Yes, you should be able to install 50 LED downlights in one or two hours with this convenient tool - quick connect surface sockets for LED Downlights. The surface sockets can be directly clamped into unstripped wires and turned it into special terminal slots in one minute. Please check the product page for more details about how to do the installation. With the default factory installed plug of this downlight, you should be able to quickly connect the downlight to the main power. And it is also very convenient to replace any faulty light in future.

Summary: Top Quality 10W DIM LED Downlights with IP44 & IC-F Rating

Order this high quality 10W Dimmable LED Downlight now for your home project. It is Bathroom OK, Insulation OK, and with NZ 3 Year Warranty.